Zenza bronica sq a manual#
Zenza bronica sq a Pc#

Warning flag in the viewfinder when using multiple exposures.

This version is sometimes referred to as the 'plastic' body ETRS and back.All of the improvements that made the ETRS different from the ETR are applied to this version of the ETRC.ETRC is essentially the same as the ETRS.Later 'plastic' ETRS with the lens release on the left side of the camera.Early metal version with locking front lens release.Two position shutter release lock - locked, front release locked (for use with speed grip or motor winder), and all releases unlocked.Electronic contact in the viewfinder to work with the metering display on the AE-II and AE-III finders.Otherwise the ETR-C is identical to the ETR.Film magazine not removable, uses film inserts instead of interchangeable backs.Time exposure lever on the lens, set to T, otherwise setting must be at A.Fully automatic instant re-opening diaphragm Special Bronica mount, filter thread: 58mm Focus range: 2-30m +inf Aperture: f/2.8-f/22.Zenzanon MC 75mm f/2.8 with Seiko central leaf shutter, eletronically controlled by the body, 5 elements in 4 groups, multi-coated, (equivalent with 35mm is 46mm).Battery test: small green led on top left of the camera and a button beneath it. Battery: 6v silver oxide or Alkaline 4LR44, etc.Others: Speed-grip shutter release connection, Motor drive contacts, flash synch contact sockets on the special part of the bottom plate Tripod socket: 1/4 inch Strap knobs.

Zenza bronica sq a manual#

Film loading: open the magazine cover and remove the film holder part with special holder shafts, load the film and put it back then slightly turn the manual winding folding lever on the right side of the magazine until film starting point mark of the film is alligned the triangular start mark on the film holder, close the magazine cover then turn the cocking crank until the number one is visible in frame counter window.

Film magazine:interchangeable, the shutter must be cocked before changing the magazine.

The dark slide is necessary to prevent the film from light when magazine changing

Dark slide:in a slot on the right side of the camera when it is on the camera shutter can not be cocked, and the film magazine can be detached when it is out of the camera shutter works.

Zenza bronica sq a Pc#

Flash PC socket: on the upper left front of the camera, w/a cap, synch.Viewfinder: Waist level finder, interchangeable, w/ a magnifier lens, also interchangeable.Mirror: not instant return, cocking the camera is necessary for the mirror return.Cocking lever: folding crank, also winds the film, double exposure prevention it is not work without the film in the camera.Cable release socket: on the lower left of the camera.Shutter release: knob on the lower right front of the camera, w/ a safety lock.Time exposure: Self-timer, via a lever on the lens.

Shutter: Seiko electronically controlled leaf shutter on the lens, speeds: 8-1/500 Mechanical control: speed 1/500, wo/battery.

Focusing: via matte ground glass screen with central bright area and fulll-area Fresnel lens, ring and scale on the lens, screen interchangeable by a lever under the finder.

Lens release: turn the lens clockwise when pressing the knob on the left lower front of the camera the knob has a safety lock the lens can be changed only when the shutter is cocked on the camera and on the lens.

Medium format SLR film camera, film: 120 roll, 220 roll, picture size: 4.5ењ†cm.

This data belongs to the photos of the camera below. Original Zenza Bronica ETR specifications

1 Original Zenza Bronica ETR specifications.

Zenza bronica sq-a